PRODUCTS

Idealarc DC600 multi-process welder offers SCR rectifier arc action for industrial DC heavy duty shop applications.

500A Multi-process power source with CrossLinc Technology.

Powerful Performance From the Ground Up Out in the shipyards, construction sites and fabrication shops, it pays to keep it simple. The Flextec 500X multi-process welder is easy to set up and operate, yet rugged enough to stand up to heavy-duty indoor and outdoor applications. Basic pulse MIG capability is standard on the Flextec 500X , including weld modes for carbon steel, stainless steel, aluminum and metalcore electrodes. The Flextec 500X welder is also equipped with CrossLinc® technology giving you the flexibility to control the machine from hundreds of feet away without a control cable.

Features:
- Simple user interface
- Compatible with CrossLinc Technology

Typical Applications:
- Shipyards
- Field Construction
- General Fabrication

350A Multi-process welder. Supports Stick, TIG, MIG, Pulsed MIG, Flux cored, Gouging. Supports 14-pin analog wire feeders, 5-pin ArcLink digital wire feeders, across-the-arc wire feeders and CrossLinc compatible wire feeders.

Whether in a shop or in the field, the Flextec 350X welder is built to perform. Equipped with CrossLinc® technology, the Flextec 350X welder can be controlled from hundreds of feet away without expensive and inconvenient control cables. Desert Duty® and IP23 rated, it can withstand harsh outdoor conditions and outperform other welders in its class. In the field, the Flextec 350XP is a rugged multi-process power source, this model stays reliable and offers much more than other inverter-based welders in its class. In the shop, the Flextec 350XP model is built to work with all 42V feeders for your factory applications. It is also compatible with Arclink® digital feeders to provide basic pulsed MIG and synergic modes and memories for quick setup and seamless connectivity.

Features:
- CrossLinc compatible

Typical Applications:
- Fabrication and Manufacturing
- Basic pulsed MIG applications
- Field Construction

Portable inverter for stick welding - 400V/3Ph - Output current: 400A@35%.

The Invertec 400SX Stick welders are built to handle harsh environmental conditions using Lincoln tunnel technology to separate the PCBs and sensitive parts from contaminating cooling airflow. The robust metal case with large protective rubber corners make these stick welders suitable for operation on site in conjunction with a generator, or within a workshop environment, providing maximum flexibility and durability.

Features:
- Robust, built for heavy environmental conditions.
- Fully featured and user-friendly control panel with digital display allows precise setting of welding current.
- Soft and Crisp multiple arc modes for different electrode types.
- Auto Adaptive Arc force standard in Soft and Crisp modes: the automatic variable Arc Force operates when required.
- Adjustable Hot Start and Arc Force allow a smooth start/restart of the electrode and prevent sticking of the electrode in the weld pool.

Portable inverter for Stick welding - 400V/3Ph - Output current: 270A@40%.

The new INVERTEC® 275S is a next generation STICK inverter that offers excellent welding processes coupled with high performance, as well as increased productivity and is the next step in professional welding. The new INVERTEC® is designed with the latest energy-saving technology and is ready to work in the most difficult environments due to its unique design. To achieve excellent welding results, the INVERTEC 275S comes complete with in-built communication devices and digital transmission systems, such as USB's, allowing the operator to monitor and track welding operations more easily. Modular system: power sources 270A@25%, a 2-wheeled CART 24 of solid metal construction with superior mobility and transportation, for the most demanding environments.

Features:
- 400V ±15%, 3Ph 50/60Hz, generator ready
- Light weight – only 14.3 kg
- Idle power 19W and efficiency > 85%
- SMAW manual and Synergic – Pulse
- STICK Pulse: 0.5-15 Hz
- Intelligent F.A.N. (Fan As Needed)
- Customer Support
- USB Key (software update, data collection)
- Voltage Reduce Device (VRD)
- Cellulosic 6010 stick capability

Portable inverter for stick welding - 230V/1Ph - Output current: 160A @20%.

The Invertec 170S offers is suited to a variety of applications and working environments. The design has been focused on providing excellent welding and starting behaviour in a robust and reliable package. It is equipped with a unique set of features and capabilities to guarantee perfect welding for your application. Rugged and robust on one hand, portable on another, the Invertec 170S is lightweight and easy to handle in any situation.

Features:
- Robust design – Unique rubber corners, metal housing and push control buttons to withstand tough environmental conditions.
- Premium arc – Advanced Lincoln technology and knowhow guarantee performance every time.
- Power Surplus – Additional power for superior arc control.
- Built-in Hot Start for stable arc with lower spatter level.
- Long cables: primary power extension cables up to 60 m.
- Lift TIG with excellent striking without tungsten contamination.

Precision TIG 225 welder features the widest welding range for automotive and motorsports TIG welding.

Get the widest operating range in its class (5 to 230 amps) with the durable Precision TIG 225. Experience enhanced starting, optimal arc stability and accomplish more precise welds and crater fills with our patented Micro-Start™ II technology. The 115V receptacles enable you to power a water cooler or other power tools. Ideal for small auto and fabrication shops and vocational training schools.

Adjust for any situation: cleaning, penetration and pulse

When welding thicker material requiring increased penetration, or when requiring increased cleaning action to break through heavy oxide layers, bypass AC Auto Balance and adjust manually for full control. Enable the TIG pulser feature to minimize material distortion from excessive heat input. The TIG pulser can also help moderate filler metal deposition for consistent bead appearance.

Superior stick welder

Also offers outstanding stick welding capabilities, including the use of up to 5/32 in. (4.0 mm) electrodes - even with Fleetweld® 5P+ (E6010).

Features:
- Easy-to-use operator interface-select mode, polarity and weld.
- AC Auto-Balance® automatically adjusts for the optimal mix of cleaning and penetration when welding aluminum.
- Enable the TIG pulser to minimize material distortion from excessive heat input.
- Offers outstanding stick welding capabilities with up to 5/32 in. (4.0 mm) electrodes.
- Experience enhanced starting, optimal arc stability, and accomplish more precise welds with our patented Mirco-Start™ II technology.

Inverter for TIG DC welding - 400V/3Ph - Output current: 400A @35%.

The Invertec 400TPX have been manufactured in a light-weight but robust outer casing, making them portable and ideal for operation even in the most hazardous environments. These machines feature HF TIG ignition, Lift TIG ignition, 2 or 4 step, variable down slope, post-flow control, digital pre-set meters with hold functions and built-in variable Pulse.

Features:
- Fully functional, user-friendly control panel layout with graph and numeric display makes it easy to set all welding parameters.
- Rugged construction: electrical safety (IP23S), potted PC boards and optimum airflow reduce contamination to extend the equipment's lifespan in the harshest environmental conditions.
- HF and Lift TIG ignition meeting all requirements.
- Perfect TIG HF starting with pre-settable starting mode.
- Complete TIG parameters setting: Pulse TIG with variable frequency that allows the welder to adjust the arc focus to suit the applications, 10 memory slots for personalized welding settings, TIG Spot welding.
Water Coolers and Carts available.

Inverter for TIG DC welding - 400V/3Ph - Output current: 300A @40%.

The Invertec 300 TPX have been manufactured in a light-weight but robust outer casing, making them portable and ideal for operation even in the most hazardous environments. These machines feature HF TIG ignition, Lift TIG ignition, 2 or 4 step, variable down slope, post-flow control, digital pre-set meters with hold functions and built-in variable Pulse.

Features:
- Fully functional, user-friendly control panel layout with graph and numeric display makes it easy to set all welding parameters.
- Rugged construction: electrical safety (IP23S), potted PC boards and optimum airflow reduce contamination to extend the equipment's lifespan in the harshest environmental conditions.
- HF and Lift TIG ignition meeting all requirements.
- Perfect TIG HF starting with pre-settable starting mode.
- Complete TIG parameters setting: Pulse TIG with variable frequency that allows the welder to adjust the arc focus to suit the applications, 10 memory slots for personalized welding settings, TIG Spot welding.
- Water Coolers and Carts available.

Portable inverter for TIG welding - 400V/3Ph - Output current: 270A@40%.

The new INVERTEC® 275TP is a new generation TIG inverter which is the next step in professional welding offering excellent welding processes and high performance, to increase productivity. The new INVERTEC® is designed with the latest energy saving technology and is ready to work in the most difficult environments due to its unique design. To achieve excellent welding results, INVERTEC® 275TP utilises digital communication systems and built-in communication devices such as USB, making it easy to monitor and track welding operations.

Features:
- 400V ±15%, 3Ph 50/60Hz, generator ready
- Light weight – 16kg
- Inverter platform product
- Idle power 19W and efficiency > 85%
- Intelligent F.A.N. (Fan As Needed)
- Customer Support
- USB Connectivity
- Voltage Reduce Device (VRD)
- Cellulosic 6010 stick capability

Inverter for TIG DC welding - 115/230V/1Ph - Output current: 220A @25%.

TIG welder combining a rugged industrial construction with excellent arc characteristics.

Features:
- Excellent arc performance – perfect HF ignition, stable, focused and fast arc (for pulse and no pulsed arc).
- Simple control panel – full control, easy set up.
- Energy efficient – PFC circuit, high efficiency, green mode.
- Portable – Small, light weight.
- PFC, protection 16A, 100m input cable, generator ready.
- Remote control optional.

Inverter for TIG DC welding - 230V/1Ph - Output current: 175A @25%.

The Invertec®175TP TIG welders combine a rugged industrial construction with excellent arc characteristics. They are full function DC TIG inverters with excellent arc control and perfect Arc Start in any welding conditions.

Features:
- Robust design – varnished PC boards.
- Improved generator compatibility: +/- 20% input voltage variation, PFC controller.
- Usable with great length of primary cable (up to 70 m in 2,5 mm² section).
- Decent welding in TIG HF and TIG Lift mode.
- Hot start function and anti-sticking device.yPortable – light weight: only 10,2 kg.

The Aspect 375 AC/DC TIG welder is perfect for mission critical welds, especially on applications such as aerospace, motorsports, shipbuilding, education and fabrication industries.

ADVANCED TECHNOLOGY MADE SIMPLE

A quality weld is always important. In some industries and applications, lives may even depend on it. If this is the challenge you face every day, choose a TIG welding machine that meets the demanding quality standards of the aerospace, motorsports, shipbuilding, education and fabrication industries.

The Aspect® 375 is the perfect choice for mission critical welds, especially on applications that must stand up to the most rigorous testing requirements.

AUTO OR MANUAL: THE CHOICE IS YOURS

Effortless arc control

Extremely fast arc response and stability for the smoothest and most efficient weld possible.

Simplicity when you want it

Activate Intellistart™ technology to automatically provide for softer starts and minimal distortion on thinner materials and hotter starts required for thicker materials. Optional AC Auto Balance® technology offers simplicity by automatically providing the optimal mix of cleaning and penetration when welding aluminum.

Customization when you need it

AC Wave Shape control enables you to customize the arc for critical aluminum welding requiring:
- A higher degree of penetration on thicker materials.
- Increased cleaning action in breaking through heavy oxide layers.
- Narrower arc profile enhancing control around corners and other tight configurations.

Features:
- Effortless arc control for the smoothest welds.
- AC Auto-Balance® makes it simple by automatically providing the optimal mix of cleaning and penetration on aluminum.
- Intellistart™ Technology provides soft starts on thin materials and hotter starts required on thicker materials.
- Customization when You need it. - Manage AC frequency, balance and offset to modify arc profile, cleaning action or penetration.

The Aspect 375 AC/DC CCC TIG welder is perfect for mission critical welds, especially on applications such as aerospace, motorsports, shipbuilding, education and fabrication industries.

ADVANCED TECHNOLOGY MADE SIMPLE

A quality weld is always important. In some industries and applications, lives may even depend on it. If this is the challenge you face every day, choose a TIG welding machine that meets the demanding quality standards of the aerospace, motorsports, shipbuilding, education and fabrication industries.

The Aspect® 375 is the perfect choice for mission critical welds, especially on applications that must stand up to the most rigorous testing requirements.

AUTO OR MANUAL: THE CHOICE IS YOURS

Effortless arc control

Extremely fast arc response and stability for the smoothest and most efficient weld possible.

Simplicity when you want it

Activate Intellistart™ technology to automatically provide for softer starts and minimal distortion on thinner materials and hotter starts required for thicker materials. Optional AC Auto Balance® technology offers simplicity by automatically providing the optimal mix of cleaning and penetration when welding aluminum.

Customization when you need it

AC Wave Shape control enables you to customize the arc for critical aluminum welding requiring:
- A higher degree of penetration on thicker materials.
- Increased cleaning action in breaking through heavy oxide layers.
- Narrower arc profile enhancing control around corners and other tight configurations.

Features:
- Effortless arc control for the smoothest welds.
AC Auto-Balance® makes it simple by automatically providing the optimal mix of cleaning and penetration on aluminum.
Intellistart™ Technology provides soft starts on thin materials and hotter starts required on thicker materials.
Customization when You need it. - Manage AC frequency, balance and offset to modify arc profile, cleaning action or penetration.

Inverter for TIG AC/DC welding - 230/400V/3Ph - Output current: 300A @35%.

Aspect 300 is an industrial AC/DC TIG welding machine designed and manufactured using the latest inverter digital technology.

Features:
- Advanced waveform technology for the best aluminium welding performance.
- Advanced TIG AC & DC Functions – Four wave shapes, Pulse, adjustable Balance and Offset, innovative and simple control panel, AC auto setting.
- Variable AC frequency (40-400 Hz) for the control of travel speed and penetration.
- Fully functional, user-friendly control panel layout with graph and a numeric display makes it easy to set all welding parameters.
- Cellulosic capability.
- Energy efficient 3 phase buck-boost circuit for energy saving.

Inverter for TIG AC/DC welding - 115/230V/1Ph - Output current: 200A @35%.

Leading technology in TIG AC/DC welding with a user friendly interface and innovative remote control system from the torch.

Features:
- Superb arc performance – Excellent HF ignition, stable & fast arc, minimum current 2A.
- Advanced TIG AC & DC Functions – Four wave shapes, Pulse, adjustable Balance and Offset, innovative and simple control - panel, AC auto setting.
- Generator compatible, ideal for site use.
- Cellulosic capability. Bright digital display – easy setup buttons, 9 memory slots, new control in the TIG torch.
- Energy efficient 1 phase buck-boost circuit for energy saving.

Six Flextec 350X PowerConnect welders in a single, easy to transport unit. Inverter racks offer additional protection on construction sites and only require one primary power drop for six welding arcs. Six Flextec 350X PowerConnect welders in a single, easy to transport unit. Inverter racks offer additional protection on construction sites and only require one primary power drop for six welding arcs.

A RUGGED MULTI-PROCESS POWER SOURCE FOR MAXIMUM FLEXIBILITY

Out on the construction jobsite or in most fabrication shops, it pays to keep it simple. The Flextec® 350X multi-process welder is designed for that kind of environment. These multi-process welders are easy to setup and easy to operate, yet rugged and flexible enough to be used in construction, fabrication, shipbuilding and other heavy-duty applications.

Simple

- Streamlined operator panel minimizes setup time
- Plug in to any 380-600V 3 phase power
- Easy process selection

Reliable

- Built on industry proven design elements of other popular Lincoln Electric welders
- Components designed to run cool for long life in high temperature environments
- Fully encapsulated and environmentally protected electronics
- Engineered for outdoor use and harsh environments (IP23 rated)

Flexible

- Compatible with across-the-arc, analog, digital or CrossLinc™ feeders
- Premium multi-process arc characteristics works with all DC wire, stick and TIG processes
- Choice of models to fit any application and budget
- Lightweight and portable

Product Highlights

- Desert Duty Rated™ for extreme temperatures up to 55°C
- VRD® Voltage Reduction Device reduces Open Circuit -Voltage for added safety
- Offered in 4 and 6 pack rack configurations
- Wide 5-425 amperage range
-Capable of Arc Gouging with 3/16 in. (4.8 mm) carbons

CrossLinc™ Technology

- Full functionality without control cables
- Enables remote procedure setting at the feeder to improve weld quality
- Increase arc time with fewer trips to the power source to adjust settings
- Improves safety by reducing jobsite clutter

CROSSLINC™ TECHNOLOGY: SOLVING SITE WELDING ISSUES

Worker safety, weld quality, productivity and equipment reliability come to mind when welding on site or on large structures.

In these environments, it is typical for the operator to work closely with a rugged, compact and lightweight welding wire feeder, connected to a weather-resistant power source hundreds of feet away.

Worker safety, weld quality, productivity and equipment reliability come to mind when welding on site or on large structures. In these environments, it is typical for the operator to work closely with a rugged, compact and lightweight wire feeder, connected to a weather-resistant power source hundreds of feet away. Until now, portable wire feeders have been available in two configurations: basic ‘across-the-arc’ models or portable feeders equipped with an added control cable.

‘Across-the-arc’ models are powered by the weld cable. This configuration provides benefits of fewer cables running back to the power source, but voltage control at the point-of-use is not possible.

The addition of a control cable to the system allows the operator to adjust voltage at the point-of-use, but these cables can be costly and add additional complexity to the production environment.

There has to be a better way.

Features:
- Runs on any input voltage 200-600VAC
- One Input drop for 6 power sources
- Forklift holes and lifting eyes to move easily around the jobsite
- CrossLinc technology Enabled
- IP23 rated for outdoor use

Flextec 500X 6-pack inverter rack 500 amps of welding power from each of 6 welders with a single primary power drop.

Powerful Performance From the Ground Up

Out in the shipyards, construction sites and fabrication shops, it pays to keep it simple. The Flextec 500X multi-process welder is easy to set up and operate, yet rugged enough to stand up to heavy-duty indoor and outdoor applications.

Basic pulse MIG capability is standard on the Flextec 500X , including weld modes for cabon steel, stainless steel, aluminum and metalcore electrodes.

The Flextec 500X welder is also equipped with CrossLinc® technology giving you the fexibility to control the machine from hundreds of feet away without a control cable.

SIMPLE

- Simple interface for ease of use
- CrossLinc technology eliminates extra cables for simple system setup


RELIABLE

- IP 23 rating means the Flextec 500X welder will excel in outdoor environments, such as construction sites and -shipyards
- Flextec 500X welder is Desert Duty® rated for operation in the harshest environments (up to 55C)
- Durable trayed and potted PC boards for electronics environmental protection

FLEXIBLE

- Multi-process power source for all your welding needs Compatible with all 42VAC wire feeders for MIG and Flux cored welding
- Arclink® enabled power source provides synergic pulse modes
- CrossLinc allows for remote control of CV and CC processes without extra cables
- Optimized Stick welding for both cellulosic and low hydrogen electrodes
- Touch-start TIG for easy, contamination free starts without high frequency

CROSSLINC TECHNOLOGY COMPATIBILITY

- Full functionality without control cables
- Enables remote procedure setting at the feeder to improve weld quality
- Increases arc time with fewer trips to the power source to adjust settings
- Improves safety by reducing jobsite clutter

Features:
- One easy power connection for 6 welding power sources
- Forklift holes and lifting eyes to move easily around the jobsite
- CrossLinc technology Enabled
- IP23 rated for outdoor use

Traditional welder/generator with up to 500 amps of pure DC output for stick and DC TIG welding applications and optional CV adapter available for wire welding. Features 120 VAC and 240 VAC single phase auxiliary power and powered by a 64.4 HP Perkins® 1104A-44 diesel engine. Not Available in the US, Canada, or EU.

The Diesel Workhorse™ – For demanding jobs that call for high amperage capabilities, the SAE-400® offers 400 amps for DC stick welding and AC power. The SAE-400® is powered by a heavy duty Perkins® industrial diesel engine. This engine offers low maintenance and long life. Add CV wire welding with the optional CV Adapter.

Features:
- Rugged Construction – Designed with heavy gauge steel case withstands rough field handling.
- Dual Continuous Current Control – Equipped with a continuous current control that used with a fine tuning control allows for precise setting of amps, volts, and slope for a digging, penetrating arc for root beads or a soft, buttery arc for stacking iron on the fill and cap passes. Tremendous control over the arc helps to overcome the most challenging joints on the job.
- High Duty Cycle Welding Output – 100% duty cycle at 400 amps and 60% duty cycle at 500 amps for the most demanding applications. Large-capacity DC weld output allows for multiple arcs with the Multi-Weld® 350 system. Available power of 22,500 watts at 60V DC.
- Generator Output – Euro and NEMA receptacles for 3,000 watts of 60 Hz, single-phase power at 120V or 240V. Industrial Diesel Engine – Powered by a 64.4 HP Perkins® naturally aspirated diesel engine.

The Vantage® 500-I is a diesel engine powered DC multi-process welding power source and 220 / 380 volt AC power generator. The DC welding control system uses patented Chopper Technology® for superior welding performance. (Not Available in US/Canada/EU).

COMPACT, MULTI-PROCESS, DESERT DUTY™ RATED - The Vantage 500-I is a rugged, reliable and capable welder for demanding construction, pipe or repair applications.

Features:
- Compact Case with Stainless Steel Enclosure- One of the most compact 500 amp machines available. Standard stainless steel roof, side panels and engine-access door deliver added protection and durability.
- Multi-Process Welding- Select one of five process modes, including CC-stick, downhill pipe (for stick), DC Touch Start TIG®, CV-wire, or arc gouging mode which maximizes output with up to 8.0 mm carbon rods.
- Desert Duty™ Rated- Tested for extreme temperature operation up to 55°C.
- Plenty of AC Generator Power- 19 kW peak (17 kW continuous) 3-phase 380V AC generator power. Will power industrial equipment such as a plasma cutter, pump or inverter welder for a second arc. Operate common construction tools with two 3.6 kW 220V 1-Phase power (European receptacles). Lighted engine dashboard gauge is readable from a distance and at night. Polarity switch to run DC- for root pass and DC+ for fill and cap passes.
- Additional Features
Exhaust Spark Arrestor included
Lower sound than previous Vantage 500-I model
Residual Current Device (RCD) included

The Vantage® 500 is a diesel engine powered DC multi-process welding power source and 120 / 240 volt AC power generator. The DC welding control system uses patented Chopper Technology® for superior welding performance. (Not Available in US/Canada/EU).

This multi-process powerhouse features standard stainless steel roof and side panels, simple controls and Chopper Technology® to deliver the low maintenance, long service life, easy operation and great arc performance every owner appreciates.

With 500 amps of welding power for stick, TIG, MIG and flux-cored processes, plenty of AC Generator power (up to 20 kW/3-Ph and 12 kW/single phase), and a large 25 gallon (95 ltr) fuel tank the Vantage 500 is everything you need for the job.

Features:
- Corrosion-Resistant Stainless Steel Case - Standard stainless steel roof, side panels and engine-access door deliver added protection, durability and corrosion-resistance. Eliminates the need to replace these items due to paint damage or rust.
- Multi-Process Welding- Select one of four process modes, including CC-stick, downhill pipe (for stick), DC Touch Start TIG® or CV wire, and then dial in the desired output. Arc gouging with up to 3/8 in. (9.5 mm) carbons.
- Plenty of AC Generator Power -20 kW continuous 3-phase 240V AC generator power rated at output will power industrial equipment such as a plasma cutter, pump, inverter welder or grinder. 12 kW continuous 1-phase AC generator power for common construction tools and lights.
- Industrial Diesel Engine - 4 cylinder 1800 RPM Deutz® Engine with a 25 gallon (95 liter) fuel tank and fuel, oil pressure and engine temperature gauges.

The Vantage® 400 is a diesel engine powered DC multi-process welding power source and 120 / 240 volt AC power generator. The DC welding control system uses patented Chopper Technology® for superior welding performance. (Not Available in US/Canada/EU).

Compact, Multi-Process, Excellent Value - The quiet, compact Vantage® 400 is an ideal choice for construction teams, pipe rig owners and rental fleet managers. Select your choice of proven 4 cylinder 1800 RPM diesel engines.

Features:
- Compact Case with Stainless Steel Enclosure - One of the most compact 400 amp machines available. Suitable for many pickup and service trucks. Standard stainless steel roof, side panels and engine-access door deliver added protection and durability.
- Multi-Process Welding- Select one of five Process Modes, including CC-Stick (up to 1/4 in.), Downhill Pipe (for stick), DC Touch Start TIG®, CV-Wire (up to 3/32 in.) or Arc Gouging mode which maximizes output with up to 5/16 in. carbon rods.
- Plenty of AC Generator Power - 19 kW peak (17 kW continuous) 3-Phase 240V AC generator power. Will power industrial equipment such as a plasma cutter, pump or inverter welder. 12 kW peak (11 kW continuous) 1-phase AC generator power for common construction tools.
- Reliable Engines - 4 cylinder 1800 RPM Perkins® and Kubota® diesel engines run smooth and quiet. Standard engine gauges allow you to monitor performance at a glance. 20 gallon fuel tank for long run time.
- Innovative Service Access - Lockable, removable sliding engine access door provides ample space for engine and oil filter work without requiring a large clearance space on your truck. Battery drawer on front of machine and top-mounted radiator cover provide convenient access to these systems. Patented tilt down control panel for easy servicing of internal components. Patented radiator cap cover is latched for easy access and is lockable.
- Low Noise - 99.1 dBA Lwa sound power (74.8 dB at 23 ft./7 m) – one of the quietest 400 amp engine-driven welders available.

The Vantage® 400-I is a diesel engine powered DC multiprocess welding power source and 220/380 volt AC power generator. The DC welding control system uses patented Chopper Technology® for superior welding performance. (Not Available in US/Canada/EU).

DESIGNED FOR WELDING IN SPECIFIC ENVIRONMENTS - When it comes to pipe and construction welding, every application, and even every region, has special requirements. The engine, controls, welding and AC generator specs – all must meet the requirements of the job and the locale.

Features:
- New Levels of Control - The Vantage® 400-I is one of those special duty machines. After listening closely to customers, we streamlined the new control panel to include a convenient Polarity Switch to make changing welding processes or electrodes required for each pass as easy as possible. The new dashboard includes a new engine function monitoring system that makes it easy to check temperature, pressure and fuel level throughout the day.
- Tailored Specifications - Engineered AC generator power specs that deliver specific output based on the region where the machine will be used. Operators have access to up to 12,500 watts of 3 phase 380 volt power.
- And All the Rest - A large 20 gallon fuel tank for long run times, an arc gouge mode when repairs are necessary, a continuous range arc force control to dial in the arc characteristics you need for every position, corrosion-resistant stainless steel panels – These are just a few of the thoughtful features built into this industrial-grade machine.

The Fleet® 500 is a low speed, diesel engine-driven welder/generator capable of DC output for constant current (CC) welding as well as 120 VAC and 240 VAC single phase auxiliary power. The machine features patented Chopper Technology®. (Not Available in US/Canada/EU).

Built for operation in remote locations, the Fleet™ 500 is simple, rugged diesel engine-driven welders for stick welding, TIG, and arc gouging. The design features time-tested Chopper Technology® and the popular Deutz® air and oil-cooled industrial diesel engines for high reliability in jungles, deserts and other extreme environments.

Features:
- Easy to Set - A Weld Mode selector gives the operator the choice of Stick, Pipe/Gouge or TIG modes. In the Pipe/Gouge mode a rocker switch provides for a high and low range and in all modes the Fine Output Control allows for fine adjustment within each range. The addition of an Arc Force control allows the operator to adjust for a soft buttery arc or a more forceful digging arc. Digital weld meters are available as an option providing supervision with an extra measure of quality control.
- Dependable - Lincoln’s proven Chopper Technology delivers easy arc starting, smooth arc action, low spatter levels and excellent bead appearance.
- Plenty of Auxiliary Power - The Fleet™ 500 provides 7200 watts of continuous single phase 240 volt power through two 3600 watt Euro Plugs and 2400 watts of 120 volt power through each of two NEMA receptacles.
- Remote Auto Sense - No longer necessary to use toggle switch from local to remote, as soon as remote is attached to the machine it senses that and automatically switches to remote control.

The Fleet® 400 is a low speed, diesel engine-driven welder/generator capable of DC output for constant current (CC) welding and 230 VAC single phase auxiliary power. The machine features patented Chopper Technology®. (Not Available in US/Canada/EU).

SIMPLE AND RUGGED STICK, TIG AND PIPE/GOUGING MODES

Built for operation in remote locations, the Fleet™ 400 is a simple, rugged diesel engine-driven welders for stick welding, TIG, and arc gouging. The design features time tested technology, and the popular Perkins industrial diesel engines. This means high reliability in jungles, deserts and other extreme environments.

Features:
- Easy to Set - A Weld Mode selector gives the operator the choice of Stick, Pipe/Gouge or TIG modes. In the Pipe/Gouge mode a rocker switch provides for a high and low range and in all modes the Output Control allows for fine adjustment within each range. The addition of an Arc Force control allows the operator to adjust for a soft buttery arc or a more forceful digging arc. Digital weld meters are available as an option providing supervision with an extra measure of quality control.
- Dependable - Based on a proven, easy to maintain platform, the Fleet 400 offers easy arc starting, smooth arc action, low spatter levels and excellent bead appearance.
Plenty of Auxiliary Power - The Fleet 400 provides 10,350 watts of continuous single phase 230 volt power through three 3,450 watt Euro Plugs.
- Remote Auto Sense - No longer necessary to use toggle switch from local to remote, as soon as remote is attached to the machine it senses that and automatically switches to remote control.

POWER MIG® 180C MIG welder is portable for wire welding on thicker material for autobody, farming, and repair.

The Professional’s Choice. Whether you’re a farmer or a fabricator, an autobody shop or a backyard mechanic, the POWER MIG® 180C will help you get the job done! It’s a portable wire welder designed for use with industrial 230 volt input power, so you can weld on thicker material - up to 3/16 in. with MIG welding and 1/2 in. with gas-less flux-cored welding. Diamond Core Technology&trade - Delivers a forgiving arc, excellent out-of-position arc action, low spatter and a wide voltage sweet spot at a given wire feed speed for steel, stainless steel or aluminum. Industrial Cast Aluminum Drive-Dual gear-driven drive rolls deliver positive traction. Patented split wire guides ensure optimal wire alignment and a brass-to-brass gun connection aids critical conductivity. A large industrial closed-design drive motor improves torque and enhances trouble-free performance. No Hassle Tool-less Design - For input power changes, wire spool mounting, wire drive service and polarity changes. Spool Gun Ready-Just remove the standard MIG gun and plug in the economical Magnum® 100SG spool gun (optional) for enhanced aluminum wire feeding performance. Toughest PC Board Protection in the Industry- ‘Potted’ to seal sensitive components from the environment, ‘trayed’ in a tough plastic tray to add rigidity and shock resistance.

Features:
- Diamond Core Technology™ - Delivers a forgiving arc, excellent out-of-position arc action, low spatter and a wide voltage sweet spot.
- Industrial Cast Aluminum Drive - Dual gear-driven drive rolls deliver positive traction.
- No Hassle Tool-less Design - For input power changes, wire spool mounting, wire drive service and polarity changes.
- Spool Gun Ready - Just remove the standard MIG gun and plug in the economical Magnum® 100SG spool gun.
- Toughest PC Board Protection in the Industry Potted to seal sensitive components from the environment.

POWER MIG® 360MP welder delivers more welding processes including MIG, Pulsed, Flux-Cored, Stick, and TIG.

More than just a MIG machine, the POWER MIG® 360MP is a professional grade multi-process welding solution for you. This machine is capable of Stick, TIG, MIG and Flux-Cored welding, and is packed with advanced features such as MIG and TIG Pulse Welding, Ready Set Weld quick set up, ArcFX technology and Memory Capability. All of these features are communicated through an easy to use, highly visible, 7 Inch color display.

7-Inch Color Display - Enhances communication with the operator

Multi-Process Capable - Welds MIG, flux-cored, stick, TIG, pulsed MIG, and advanced processes like Pulse-On-Pulse® and Power Mode®.

Aluminum Pulse Process - Welds 4XXX and 5XXX series aluminum for superior quality welding.

Pulse-on-Pulse® - Delivers a stacked dime appearance when welding aluminum.

Power Mode® - Maintains a stable, smooth arc for short arc welding on steel.

Synergic Control - Set weld procedures with one control.

An overall performer – from excellent feedability to good arc performance. No side cutters are required to restart, just break the wire off in your hands – it's that easy.

A gas-shielded, flux-cored wire designed for hot, fill and cap pass welding on up to X80 grade pipe.

A gas-shielded, flux-cored wire designed for hot, fill and cap pass welding on up to X70 grade pipe.

Has a low silicon level for unblemished welds with less clean up required. Provides good back bead shape when using the STT® process on root passes. Recommended for root pass welding of up to X100 grade pipe as well as hot, fill and cap pass welding of up to X70 grade pipe.

A versatile wire suitable for all-position welding of light gauge or thin plate. Recommended for maximum plate thicknesses in the range of 7.9 mm (5/16 in) to 12.7 mm (1/2 in).

Used for welding similar alloys (containing approximately 2% molybdenum). Also used for high temperature service applications. The maximum carbon content is maintained at or below 0.03% to increase resistance to intergranular corrosion. Can be used for welding molybdenum-bearing austenitic alloys containing 0.03% maximum carbon.

Stainless steel welding rods designed to provide optimal bead appearance when TIG welding on a variety of materials.

Stainless steel welding rods designed to provide optimal bead appearance when TIG welding on a variety of materials.